Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Hollywood, FL
Gate installation in Hollywood, FL means building a gate that can take salt air, summer squalls and hurricane-season wind uplift without rusting apart at the hinges. We’re a dedicated gate company, and Hollywood is one of the toughest places in Broward to get this right. The city mixes 1950s concrete-block ranch homes east of the Intracoastal with 1970s-to-1990s stucco-over-block houses out west, and each one needs a different approach to posts, anchoring and hardware. Whether you’re replacing a rusted original or automating a driveway gate for the first time, we handle the job from measurement through the finished swing or slide. Call (888) 399-8022 for a free estimate.
Why Hollywood Homes Are Different
Hollywood sits right in the salt-and-storm belt. Marine air rolls in off the Atlantic year-round, and the June-to-November hurricane season throws wind-driven rain and flying debris at every gate in the city. That combination is harder on metal than what inland Broward deals with a few miles west. Gates here have to be specified for salt exposure and wind-rated reinforcement from the start, not patched into it later.
The housing stock shapes the work too. East of the Intracoastal, 1950s and 60s concrete-block ranch homes often still have their original single-swing steel gates, and that old galvanized hardware corrodes from the inside out. The gate can look solid from the street while the bottom rail and hinge plates are already thin. In the western ZIP codes, 33025 and 33026 among them, 1970s-to-90s stucco-over-block homes tend to carry newer decorative aluminum or PVC gates that fail differently – usually at the operator or the anchor, not the frame. Along the beach, mid-rise condos add shared driveway and pool gates where access control and wind rating both matter. We probe bottoms and hinges before recommending anything, because in Hollywood a gate that looks fine can be one storm away from a failure.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Hollywood Services
Two jobs come up more than any other for Hollywood property owners: getting a gate that’s already failing back to working order, and getting a new one built for this climate. Here’s what each involves.
Gate Repair in Hollywood
Most repair calls in Hollywood come down to corrosion or impact. Salt spray seizes hinges, eats through galvanized hardware and pits aluminum tracks, and hurricane-season debris bends panels and knocks rollers out of line. We diagnose the actual failure first – frame, hinge, latch, track or anchor – rather than swapping parts until something works. On the east-side neighborhoods, that often means probing the bottom rail and hinge plates for hidden rust before we quote, since a gate that looks intact can be structurally spent. You’ll get a written price before any work starts. For details, see Gate Repair in Hollywood. Call (888) 399-8022 for a free estimate.
Electric Gate Repair in Hollywood
Automated gates in Hollywood fight the same salt air as the hardware, and the operator’s control board, limit switches and wiring connections are where it usually shows. Humidity works into enclosures, terminals corrode, and a gate that ran fine in March starts stalling or reversing by August. We troubleshoot the system itself – motor, board, sensor and power – instead of defaulting to a full replacement, which saves you money when the fix is a connection or a limit setting. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. More on that at Electric Gate Repair in Hollywood.
Gate Installation in Hollywood
New Gate Installation in Hollywood starts with the site, not the catalog. Between the salt-laden air, the wind uplift a coastal property has to withstand, and the mix of 1950s concrete-block ranches east of the Intracoastal and stucco-over-block homes in the western ZIPs, the right gate here is specified for corrosion resistance and wind rating before anything gets ordered. We measure the opening, check the soil and existing anchors, and match the hardware to the exposure. On older east-side properties, that frequently means replacing original galvanized components with stainless from the outset rather than repeating a failure the previous gate already had. Because a new gate is measured, ordered and scheduled, we quote a written price after the on-site visit rather than promising a same-day job.
Automatic Gate Installation
Signs you need it
You’re tired of getting out to open the gate every time, or the existing manual latch has corroded shut and stopping the car to wrestle with it has become the routine.
What it costs in Hollywood
Automatic gate installation in Hollywood typically runs $2,800 to $6,500, depending on gate size, operator class and whether a power run is needed, with the written estimate setting the final figure.
How we do it
We measure the opening, confirm the swing or slide path, set the operator and control enclosure clear of standing water, and test the safety edges and limits before we hand over the remotes.
Electric Gate Installation
Signs you need it
The gate needs to open for vehicles without anyone stepping out, or you’re adding access control to a shared driveway or pool entrance.
What it costs in Hollywood
Electric gate installation in Hollywood is typically $3,200 to $7,500, and the price depends on the operator, the power run and the access-control hardware, with the written estimate setting the final number.
How we do it
We site the operator, run and protect the power, mount the control board and entry devices, then set travel limits and check the reversing and obstruction safety systems before the gate goes into service.
What Gate Installation Costs in Hollywood
These are typical ranges for gate installation work in Hollywood. Every job is quoted in writing before we start, and the estimate is free.
| Item | Typical range in Hollywood |
|---|---|
| Automatic gate installation | $2,800 – $6,500 |
| Electric gate installation | $3,200 – $7,500 |
| Driveway or sliding gate installation | $1,800 – $5,500 |
Do I need a permit to install a gate in Hollywood?
Most gate installations in Hollywood that involve a power run or significant structural work need a permit, so ask the city’s building department before work begins. We’ll tell you what the job involves so you can confirm the requirement.
Can you automate a gate I already have?
In most cases yes. If the existing frame and hinges are sound, we can add an operator and controls rather than replace the whole gate. We check the structure and corrosion first, since salt air on older Hollywood gates can rule it out.
Brands We Service in Hollywood
We work on the brand you already have. Our technicians handle FAAC, BFT, Linear and Viking systems alongside the rest of the nine brands we service, from budget residential openers to commercial access-control units. No referrals when a less-common system shows up. Browse our brands to see the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Hollywood, FL
Typical ranges for gate work in Hollywood are below. Salt exposure and wind-rated reinforcement can push these toward the top of the range, and older east-side properties sometimes need anchor or footing work that adds to the job.
| Service | Typical range in Hollywood |
|---|---|
| Automatic gate installation | $2,800 – $6,500 |
| Electric gate installation | $3,200 – $7,500 |
| Driveway or sliding gate installation | $1,800 – $5,500 |
| Gate repair | $150 – $650 |
| Electric gate repair | $200 – $850 |
What moves the price up in Hollywood is corrosion repair that turns out to be structural, plus any power run or safety hardware a new operator needs. The price is quoted and agreed before any work starts, so the number you accept is the number you pay.
Neighborhoods We Serve in Hollywood
We cover Hollywood from the beachside streets east of the Intracoastal out to the western ZIPs, including properties near 33020. Coastal addresses tend to need corrosion-first attention, while the inland tract homes usually call about operator and anchor issues. Wherever you are in Hollywood, the same free estimate and written price apply.
- Hollywood Beach and the beachside blocks
- Downtown Hollywood
- Emerald Hills
- Hollywood Hills
- West Hollywood
Service Area – Cities Near Hollywood
We work throughout Hollywood and the surrounding communities. If you’re just outside the city line, we can still help. Homeowners in Hallandale Beach, FL and Aventura, FL to the south call us for the same salt-and-storm gate problems, and we cover Davie, FL and Sunny Isles Beach, FL as well. Call (888) 399-8022 to confirm coverage for your address and get a free estimate.
Serving Hollywood, FL – Our Local Coverage Area
We serve Hollywood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Hollywood
We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. We’re closed Saturday. Repair calls in Hollywood are often same-day, while new installations are measured and scheduled because the gate and operator have to be ordered.
Often yes on both. A gate that involves a power run or structural change usually needs a city permit, and many Hollywood HOAs have their own rules on gate style, height and color. Check with your HOA and the city’s building department before ordering.
We serve all of Hollywood, from the beachside neighborhoods east of the Intracoastal to the western ZIPs, along with the nearby cities in our service area. Call (888) 399-8022 and we’ll confirm your address and set up a free estimate.
If your gate needs to survive another Hollywood summer, call (888) 399-8022 for a free estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Our technicians have up to 12 years of experience, and we’ll diagnose the actual problem before quoting a written price you can approve.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Hollywood Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Diego Reyes"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Jamal Carter"Repair is holding. He was quite a bit later than the window I was given, and nobody called me about it, I had to call them. The work itself was done well once he got here."
- Hector Rodriguez