Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Motor & Opener Cost in Pompano Beach?
Gate motor and opener work in Pompano Beach typically runs $350 to $2,800 depending on what you need. A repair to an existing operator (motor, control board, limit switch, or arm) commonly lands between $250 and $850, while a full new opener installation with a residential slide or swing motor runs $1,400 to $2,800. The written estimate we provide after a free on-site look sets your final price.
Most property owners here call because the gate stopped moving, the remote quit, or the arm keeps cycling without actually opening. Whether your system is a LiftMaster, a Ghost Controls, a DoorKing, or one of the other brands we work on, the first job is an accurate diagnosis, not a parts swap. Our technicians have up to 12 years of experience and every tool, part, and habit is focused on gates.
Key Takeaways
- Repairs to an existing gate motor commonly fall between $250 and $850.
- Full new opener installation runs $1,400 to $2,800 for residential swing and slide gates.
- Commercial access-control openers and heavy slide systems cost more and are quoted per site.
- We service nine major brands, so a less-common system doesn’t mean a referral to someone else.
- We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Gate Motor & Opener Cost Breakdown (2026)
The table below gives typical 2026 Pompano Beach ranges for the work we do most. These are estimates, and the free on-site look and written estimate set the final price. Brand, gate size, operator class, and access-control features all move the number.
| Work | Typical Range | What’s included |
|---|---|---|
| Diagnostic visit (applied to the repair) | $0, free estimate | On-site look, brand check, written estimate |
| Motor replacement, residential swing | $450 – $1,200 | Motor unit, basic wiring check, travel limit set |
| Motor replacement, residential slide | $600 – $1,500 | Slide operator, chain or rack check, limit set |
| Control board replacement | $280 – $650 | Board, reprogramming, safety check |
| Arm or actuator replacement (swing) | $350 – $850 | Arm, bracket, travel adjustment |
| Limit switch, safety sensor, or photo-eye | $180 – $450 | Sensor, alignment, obstruction test |
| Remote, keypad, or receiver reprogramming | $95 – $275 | Re-pair, new code, transmitter |
| Full new opener, residential swing or slide | $1,400 – $2,800 | Operator, hardware, wiring, safety check, install |
| Commercial access-control opener | Quoted per site | Heavy operator, access control, loop or keypad |
A few things push the number up. A commercial-grade DoorKing or Elite operator with loop detectors and an access-control board is a different job than a residential Mighty Mule or Viking swing arm. A heavy or oversized gate needs a bigger motor to move it reliably. Faded or damaged wiring on an older gate often shows up mid-repair and adds labor. On the other side, if the problem is a single sensor, a limit switch, or an out-of-sync remote, the fix is quick and stays in the low range.
Whether it’s the motor, the board, or the hardware, we troubleshoot the actual failure before recommending anything. That one habit keeps costs down more than any single repair does.
What Affects Gate Motor & Opener Pricing in Pompano Beach
Pompano Beach sits in a warm, humid part of Broward County, and the local housing mix shapes what a gate job costs. A lot of properties here run automated slide and swing gates for driveways, and a fair number of homes and small commercial sites use access-control systems with keypads and receivers. That means the work we see is a mix of residential openers and light commercial units, and the price swings with the class of operator and how much of the system has to come apart.
- Which brand you own. A standard LiftMaster, Linear, or Viking residential operator is usually straightforward to service. A FAAC or BFT unit, or a commercial DoorKing access-control system, may need a dedicated part and a bit more time to set up correctly. Because we work on all nine of those brands, we aren’t forced to swap a repair for a full replacement just because we don’t recognize the unit.
- Residential vs. commercial grade. A residential swing or slide opener is built for a lighter duty cycle than a commercial access-control operator. Heavy gates, high-traffic properties, and anything with loop detectors or a card reader sit in a higher price band.
- Gate type: swing vs. slide. Swing gates use an arm or actuator and the repair path is usually quicker. Slide gates bring in the track, chain or rack, and the gear, which can add to the job. We handle both.
- Wiring and power. The operator’s wiring and power are the dangerous part of any electric gate, and old or damaged runs add labor. We check the low-voltage control side and route a safe power check before we touch the motor.
- What actually failed. A photo-eye knocked out of alignment is a low-range fix. A burned-out motor or a dead control board is a bigger one. Accurate diagnosis first is what keeps a small problem from turning into a big invoice.
- Whether you repair or replace. If the motor is sound and only a part failed, repair wins on cost. If the operator is at the end of its life and every visit is a new part, replacement is cheaper over time. We tell you which one it is, without pushing the expensive option first.
Pompano Beach is home to a mix of established residential streets and busy commercial corridors, and both call for gate specialists rather than a general handyman who handles a gate on the side. Our whole focus is gates: repair, gate repair in Pompano Beach, and new installation. That focus is the reason we can walk up to an unfamiliar brand and know where to look.
How to Save on Gate Motor & Opener
You don’t have to replace the whole operator to get a working gate back. A few practical moves keep the bill down, and none of them mean cutting corners on safety.
- Get a diagnosis before a replacement. A dead gate is not automatically a dead motor. The control board, a limit switch, or a slipped arm can all stop the gate while the motor is fine. A brand-agnostic technician who troubleshoots the real fault saves you the cost of a whole unit you didn’t need.
- Fix the small parts early. A photo-eye that gets knocked loose or a remote that’s out of sync is a low-range fix. Left alone, a sensor problem can turn the gate into a no-go zone or push the motor to strain against an obstruction.
- Match the operator to the gate. When it is time for a new opener, size it to the gate you actually have. An undersized motor on a heavy gate works harder and fails sooner; a properly matched one lasts and keeps the price in the residential band.
- Ask for the written estimate in advance. We quote the job up front so you know the range before we start. Free estimates mean you can compare options without paying to find out.
- Get it serviced once before it fails. A one-time visit to check the track, hinges, arm, and wiring catches wear before it strands a gate. It’s priced per job after we look at your system.
Call (888) 399-8022 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Does an Automated Gate Motor Cost More Than a Standard One in Pompano Beach?
Yes. A full automated opener installation typically runs $1,400 to $2,800, while basic gate hardware repairs stay below $450. The automation is the expensive piece: the motor, the control board, the safety sensors, and the wiring all add to the job. Standard hardware (hinges, latches, and the structure itself) is usually a lower-cost fix when it’s the only thing that failed. Because we cover both the electric side and the standard hardware, one provider handles the whole system, and you don’t lose time hunting down a second company.
If your question is whether to repair or replace, the honest answer depends on the operator’s condition. A newer motor with a failed sensor is a cheap fix. An older unit with a dead board and a straining motor is often cheaper to replace. We’ll tell you which it is after we look. Call (888) 399-8022 for an exact quote and a free estimate.
FAQs – Gate Motor & Opener Cost
How much does a gate opener cost to install in Pompano Beach?
A full new residential gate opener installation in Pompano Beach typically costs $1,400 to $2,800. That covers the operator, hardware, wiring, and a safety check. A commercial access-control opener is quoted per site because the operator, access control, and traffic are all heavier. Call (888) 399-8022 for an exact figure and a free estimate.
How much does gate motor repair cost in Pompano Beach?
Most gate motor repairs in Pompano Beach run $250 to $850. A sensor, limit switch, or remote fix sits in the low end; a control board or arm replacement moves toward the high end. The written estimate sets the final price. Call (888) 399-8022. We answer 24/7.
Is it cheaper to repair or replace a gate motor?
Repair is cheaper when only one part failed and the motor is sound, usually $250 to $850 versus $1,400 to $2,800 for a new operator. If the motor is at the end of its life and parts keep failing, replacement costs less over time. Call (888) 399-8022 for a free estimate and an honest read on which way it goes.
Which gate brands do you service, and does brand affect the price?
We service nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Brand affects price mainly through part cost and setup time; a common residential operator is usually cheaper to service than a commercial access-control unit. Because we work on the brand you already have, a less-common system doesn’t mean a referral to another shop. Call (888) 399-8022 for a quote.
Can you come the same day for a gate that won’t open?
Same-day service is often possible for a gate that’s stuck, and we answer 24/7 with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (888) 399-8022 and we’ll give you the soonest available visit.
What Happens When You Call
When a gate stops, the priority is getting it back to working order without guessing at parts. When you call, we take the brand, gate type (swing or slide), and what the gate is doing, then book a visit and firm up the range. On site, a dedicated gate technician checks the operator, the control board, the safety sensors, and the hardware, so nothing gets missed. Then you get a free written estimate with the final price, and you decide from there.
We’re a pure-play gate specialist, not a garage-door company or general handyman doing gates on the side. Every technician, every tool, and every part is focused on gates. That’s why a LiftMaster, a FAAC, or a DoorKing all get the same accurate reading. If you’re in Pompano Beach and your gate needs attention, one call covers the brand you own.
Contact Gate Repair Pompano Beach for a Free Gate Motor & Opener Estimate
Call (888) 399-8022 for a free estimate on any gate motor, opener, or gate repair in Pompano Beach. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Same-day service is often available, and you’ll know your range before we start. Whether it’s the motor, the board, or the hardware, our gate specialists get it back to working order, and one provider handles the whole system from repair through installation.
Pricing reflects the Pompano Beach market as of 2026. Gate Repair Pompano Beach offers free estimates – call (888) 399-8022.
What Our Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Diego Reyes"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Jamal Carter"Repair is holding. He was quite a bit later than the window I was given, and nobody called me about it, I had to call them. The work itself was done well once he got here."
- Hector Rodriguez