Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Pompano Beach?
Gate installation in Pompano Beach typically costs $2,800 to $7,500 for a residential automated system, with most homeowners landing between $3,500 and $5,200 for a standard driveway gate with an opener, controls, and hardware. A manual or simple ornamental gate runs $1,200 to $2,600, while commercial-grade access-control systems climb from $8,000 to $25,000 depending on width, operator, and entry hardware. Your written estimate sets the final price, and we provide it free after an on-site look at your property.
Pompano Beach sits on flat, sandy ground with a high water table and a summer wet season that turns a gate footprint into a real construction question. That underlying soil and drainage picture, more than anything on the gate itself, is what separates one estimate from another here. We spec every job around it.
Key Takeaways
- Residential automated gate installation in Pompano Beach usually runs $2,800 to $7,500.
- Manual gates start lower, around $1,200, and skip the operator entirely.
- Concrete footings, drainage, and safe-distance clearance drive most cost swings.
- Operator brand and access controls (keypad, remote, intercom, loop) move the number as much as the gate panel does.
- Free on-site estimates: call (888) 399-8022. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Gate Installation Cost Breakdown (2026)
Here’s how a Pompano Beach gate installation breaks into line items. Ranges are typical estimate bands for the local market, not quotes. Your property’s conditions decide where in each range you land.
| Line Item | Typical Range (Pompano Beach, 2026) |
|---|---|
| Manual swing or slide gate (material + install) | $1,200 – $2,600 |
| Automated residential swing gate (operator + controls) | $2,800 – $5,500 |
| Automated residential slide gate | $3,200 – $7,500 |
| Concrete footing and post setting | $400 – $1,400 |
| Drainage correction / grade work | $600 – $2,500 |
| Access control (keypad, remotes, intercom, loop detector) | $350 – $2,200 |
| Electrical run to operator | $500 – $2,000 |
| Commercial operator / access-control system | $8,000 – $25,000 |
Two things push the total up more than most people expect. The first is the footing and the ground under it. Pompano Beach’s sandy soil drains quickly but doesn’t hold a post the way packed clay does, so posts need proper footing depth and a concrete pour sized to the gate. The second is the electrical run to the operator. If the power source is on the far side of a driveway or across a yard, trenching and conduit add real money. On the other side, a manual gate with no operator is where you save the most, and a narrow opening can keep the gate panel and hardware costs down too. Our technicians have up to 12 years of experience sizing these jobs, so we can tell you up front which costs are fixed and which you can work around. We don’t do guesswork; we diagnose, spec, and quote the actual property.
What Affects Gate Installation Pricing in Pompano Beach
- Gate width and weight. A single 12-foot driveway gate and a 20-foot double gate are different jobs. Wider and heavier panels need bigger posts, stronger hardware, and an operator rated for the load, all of which raises the number.
- Swing versus slide. Slide gates generally cost more to install than swing gates because they need a clear travel path, a track or cantilever base, and more careful footing work. Swing gates are simpler but need room to open and enough clearance behind the posts.
- Soil and footing conditions. The sandy ground common across Pompano Beach holds a post differently than denser soil, so footing depth and the concrete pour matter. If the ground has settled unevenly near a lot line, we may need to correct the grade before setting posts.
- Drainage and the wet season. Pompano Beach gets heavy summer rain, and a gate that has to cross a low spot needs drainage or a raised base so the operator isn’t sitting in standing water. That drainage work is a common line item on local estimates.
- Operator and brand. The opener is a big share of the price. Budget residential systems cost less than commercial-grade operators, and the brand you choose affects both the unit and the controls. We work on the brand you already have, and we install systems across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
- Access control and entry hardware. A single remote is cheap. A keypad, intercom, vehicle loop detector, and phone-based entry add up fast, and commercial properties usually need more of them.
One local factor that catches people off guard: clearance and safe-distance rules. Automated gates are moving machinery, and a gate that swings or slides into a walkway, driveway, or property line needs the right clearances and safety sensors so it stops for a person or a vehicle. We check that on the site visit because it can change where the gate goes and what hardware is required. Dangerous parts on any automated gate are the operator’s wiring and power, heavy panels that can crush, and slide gates that come off track. That’s not a place for a homeowner to improvise. If you’re weighing repair against a fresh install on an existing gate, see our gate repair Pompano Beach page for how we approach the repair side first.
How to Save on Gate Installation
The biggest savings come from decisions made before a shovel hits the ground. Here’s what actually moves the number.
- Keep the gate manual if the site allows. Skipping the operator and its electrical run is the single largest cut. A manual gate is fine for many residential entrances where someone is always there to open it.
- Reuse what’s sound. If you have existing posts, a gate panel, or controls in decent shape, a partial install that reuses them beats a full replacement. We’ll tell you honestly what’s worth keeping and what isn’t.
- Match the operator to the gate, not the brochure. Overbuying a commercial-grade operator for a light residential gate wastes money, and underbuying one for a heavy gate costs more later. We size it to the actual load.
- Bundle the access control. Adding a keypad, remotes, and a loop detector in one visit is cheaper than adding them piecemeal over time. Plan the whole entry now.
- Fix drainage at install, not after. Correcting the grade and footing during installation costs less than tearing out a settled gate a season later.
- Get a free estimate first. The estimate is free, and it’s the only way to know which of these apply to your property. Call (888) 399-8022 and we’ll set up an on-site visit. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
One more way to save: get the right diagnosis before you commit to a full replacement. A gate that’s sticking, dragging, or slow to open is sometimes a hardware or control problem, not a reason to buy new. We troubleshoot the actual issue rather than defaulting to a replacement, and that alone saves customers real money. If your gate is automated and acting up, our Pompano Beach service area page covers the electric side in more detail.
Is Gate Installation Cheaper Than Repairing an Old Gate?
Repairing an old gate is often cheaper in the short term, but once the posts, operator, and controls are all failing, replacement can cost less over a few years. The tipping point is usually structural: if the posts are compromised or the gate panel is warped or heavy with age, patching it just postpones the same problem. When the operator is the only weak link, a repair or a new opener keeps your costs down without a full install. We look at the motor, the board, and the hardware together and tell you which path makes sense for your gate. Call (888) 399-8022 for a free estimate and a straight answer on repair versus replace.
FAQs – Gate Installation Cost
How much does a basic gate installation cost in Pompano Beach?
A basic manual gate installation in Pompano Beach runs $1,200 to $2,600, and an automated residential system runs $2,800 to $7,500. The low end covers a simple swing gate with standard hardware; the high end covers a wider gate with an operator and access controls. Call (888) 399-8022 for an exact quote. Estimates are free.
How much does an automated electric gate cost in Pompano Beach?
An automated electric gate with operator and controls typically costs $2,800 to $7,500 in the Pompano Beach market, depending on gate type, width, electrical access, and control features. Commercial-grade systems start around $8,000. Your written estimate sets the final price after we see the property. Call (888) 399-8022 to schedule the free estimate.
What’s the cheapest way to add a gate to my property?
The lowest-cost path is usually a manual gate at $1,200 to $2,600, reusing sound existing posts where possible and skipping the operator. If you need automation, sizing a budget residential operator to a standard single gate is the next step up. We won’t upsell a commercial system you don’t need. Call (888) 399-8022 and we’ll quote the lowest-cost option that actually fits your entrance.
Do I need a permit to install a gate in Pompano Beach?
Most gate installations that involve new posts, footings, electrical work, or a change to an existing entrance require a permit in Pompano Beach. Ask the city’s building department about your specific project before work starts, and check the contractor’s license. We can walk you through what’s typically required during the estimate. Call (888) 399-8022 with your address and we’ll talk it through.
How long does a gate installation take?
A standard residential gate install usually takes one to three days once the site is prepped, with complex footing, drainage, or electrical work adding time. Manual gates are faster; automated systems take longer because of the operator wiring and testing. We’ll give you a realistic timeline in the written estimate. Call (888) 399-8022 to get started.
What Does a Proper Gate Specialist Install Look Like in Pompano Beach?
We’re a gate specialist, not a general handyman or a garage-door company that handles gates on the side. Every technician, tool, and part is focused on gates. That matters most on the automated side, where the operator, the control board, and the mechanical hardware all have to work together. We work on the brand you already have, and our background spans LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, from budget residential openers to commercial-grade systems. That range means one call covers virtually any gate, and you’re not handed off to another shop when you own a less-common system.
Installation is one part of a full service arc. We handle repair, electric gate repair, and new installation, so when a gate ages out or a setup stops working, you’re not starting over with a second company. Whether it’s the motor, the board, or the hardware, we troubleshoot what’s actually wrong and install to spec. Our technicians have up to 12 years of experience, and every job starts with an accurate diagnosis and a written estimate. Dangerous parts on a gate are the operator’s power and wiring, heavy panels that can shift or drop, and slide gates that come off track. We flag those and handle them properly so the gate is safe for everyone who uses it. We keep the scope on gates: repair, electric gate repair, and installation, nothing outside those three.
Booking Your Gate Installation Estimate
The estimate is free, and the final price is set in writing per job after we look at the property. To book, call (888) 399-8022. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed on Saturday. If a gate has failed late in the day, a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Before the visit, have a rough measure of the opening, a sense of whether you want swing or slide, and any notes on how you’ll open it (remote, keypad, intercom). That speeds up the spec and keeps the estimate tight. We’ll give you the line-item costs and the timeline, and you’ll be talking to a dedicated gate technician who knows your system, not a generalist guessing at it. If your property is nearby, our Pompano Beach page has the local details; for repairs to an existing gate, gate repair Pompano Beach is the place to start.
Pricing reflects the Pompano Beach market as of 2026. Gate Repair Pompano Beach offers free estimates – call (888) 399-8022.
What Our Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Diego Reyes"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Jamal Carter"Repair is holding. He was quite a bit later than the window I was given, and nobody called me about it, I had to call them. The work itself was done well once he got here."
- Hector Rodriguez