Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Pompano Beach?
Gate repair in Pompano Beach typically costs $185 to $650 for most residential fixes, with simple hardware adjustments on the low end and control board or motor replacements near the top. Commercial access-control systems and full operator replacements usually run $650 to $2,400. The exact price depends on your gate’s brand, the failed component, and whether the gate is automated, so the written estimate you get after we look at the system sets the final number.
We’re a gate-only specialist, which means the technician who shows up has seen your type of failure before. Whether it’s the motor, the board, or the hardware, the diagnostic approach stays the same: find the actual problem first, then price the fix. Our technicians have up to 12 years of experience, and we work on the brand you already have.
Key Takeaways
- Most residential gate repairs in Pompano Beach land between $185 and $650.
- Operator and motor replacements run $650 to $2,400; commercial openers sit at the higher end.
- Hardware-only fixes (hinges, rollers, latches, tracks) are the cheapest jobs, usually $150 to $350.
- The estimate is free, and the written estimate sets the final price before any work starts.
- We answer 24/7. Fast dispatch, 7am-7pm.
Gate Repair Cost Breakdown (2026)
Here’s what the common gate repairs cost in the Pompano Beach market this year. These are typical ranges for residential and light commercial gates. Heavy commercial slide gates and multi-operator access systems can push past these numbers, so treat the table as a starting point.
| Repair Type | Typical Cost Range | What’s Usually Involved |
|---|---|---|
| Hinge, roller, or latch repair | $150 – $350 | Hardware replacement, realignment, lubrication on worn pivot points |
| Gate realignment or sagging fix | $185 – $450 | Resetting hinges or posts, adjusting swing or slide track |
| Remote and receiver programming | $125 – $250 | Pairing new remotes, replacing a failed receiver, clearing old codes |
| Safety sensor and photo-eye repair | $165 – $375 | Replacing blocked or failed sensors, rewiring, realigning the beam |
| Control board replacement | $285 – $650 | Diagnosing the board, sourcing the match for your brand, reprogramming |
| Motor or operator replacement | $650 – $2,400 | New operator, mounting, wiring, limit setting, full access-control reconnection |
| Electric gate repair (diagnostic plus fix) | $195 – $750 | Tracing power or signal faults, repairing wiring, restoring automatic operation |
| Slide gate track and wheel repair | $210 – $520 | Replacing worn wheels, repairing or replacing the track, resetting the gate travel |
| New gate installation (operator included) | $2,800 – $7,500 | Gate, posts, operator, wiring, and access control setup |
What pushes a bill toward the top of these ranges? Brand-specific parts, commercial-grade access control, and any job where the wiring has to be traced through a long driveway run. What keeps it low? A single failed component with a clean diagnosis, which is why we troubleshoot before we quote a replacement. Gate repair in Pompano Beach is a market where plenty of generalists will swap a motor to make a symptom go away; we’d rather find the $40 part that failed and tell you honestly.
What Affects Gate Repair Pricing in Pompano Beach
A few local and technical factors move the number more than anything else. Here’s what we weigh when we put together an estimate:
- Brand and system type. We’re familiar with nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Budget residential openers like Mighty Mule use different parts than commercial DoorKing access systems, and the part cost is the biggest variable in any quote.
- Residential vs. commercial access control. A homeowner’s swing gate is one thing. A property manager’s slide gate with keypad, intercom, and loop detectors is another, and the diagnostic time runs longer on multi-component systems.
- Automated vs. manual hardware. Electric gate repair involves the operator, the power feed, and the control board. Manual gate hardware is simpler and cheaper to fix, but the mechanical work (posts, tracks, hinges) can still take real labor.
- Pompano Beach’s heat and humidity. Long stretches of warm, humid weather here work on outdoor hardware year-round. Hinges stiffen, control enclosures collect moisture, and operators that sit in direct afternoon sun run hotter. That environment shapes which parts fail first, and it’s a big reason we see board and sensor failures as often as we do.
- Storm and impact damage. Wind-driven debris and falling limbs are the usual culprits when a gate gets knocked out of alignment or a panel gets bent. Hail is uncommon in this part of Florida, so impact and storm damage are what we actually see. Repairing a bent gate frame costs more than adjusting a hinge, and it’s worth knowing which one you have before you get a quote.
- Gate age and prior repairs. Older gates with a history of patch fixes can hide a second problem behind the first. We’d rather quote the real fix than have you call us back in a month.
One more factor that doesn’t cost you money but saves it: an accurate diagnosis. We see plenty of gates where a previous tech replaced a motor when the actual failure was a sensor or a wiring fault. That’s a guess disguised as a repair, and it’s why we start every visit by confirming the fault before we discuss parts.
How to Save on Gate Repair
There’s no magic discount on gate work, but there are smart ways to keep the bill down without cutting corners. Here’s what actually helps:
- Get the diagnosis right the first time. The most expensive gate repair is the one you pay for twice. A brand-agnostic diagnostic visit costs less than a wrong replacement, every time.
- Repair the component, not the whole system. If the board failed, you usually don’t need a new motor. If a hinge is worn, you usually don’t need a new gate. Ask any technician whether a smaller fix is available before approving the big one.
- Address alignment and hardware early. A sagging gate that drags on the ground wears out the operator faster. Fixing a hinge today is cheaper than replacing a motor next season.
- Keep the gate’s track and hinges clear. Debris in a slide gate’s track and grit in a swing gate’s hinges both accelerate wear. A quick sweep and a check for loose bolts go a long way.
- Get a written, itemized estimate. Ours is free. When a quote lists the parts and the labor separately, you can compare it to another quote honestly.
We service both electric and manual systems, so you don’t have to find a second company if your needs change from a repair to a new install. If you want a straight answer on your gate’s cost, call (888) 399-8022 for a free estimate. We answer 24/7.
What Does Electric Gate Repair Cost in Pompano Beach?
Electric gate repair in Pompano Beach typically runs $195 to $750, depending on whether the fault is in the operator, the control board, the sensors, or the wiring. The diagnostic visit is the start of the estimate, not a separate line for us; the price you see is the repair itself, confirmed in writing before we begin.
Automated gates fail in a handful of predictable ways: the operator runs but the gate doesn’t move, the gate reverses on closing, the remote stops responding, or the gate stops mid-travel. Each points to a different part of the system. A tech who only knows one brand will guess. We work across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so the brand you own isn’t a reason for a referral. For a closer look at what we handle on the repair side, gate repair Pompano Beach covers the full scope.
One safety note we won’t skip: automated gates are heavy moving machinery with a live power feed. A gate that reverses unpredictably or drops on its own is a hazard, and the operator’s wiring and power should be left to a trained technician. We can walk you through what to check (remotes, sensor lights, obvious obstructions) but not how to open the control box yourself.
Repair or Replace: Which Costs Less?
Repair is almost always cheaper in the short term, and replacement is only the right call when the gate’s frame or operator is genuinely at the end of its life. As a rough rule, if a repair costs more than about half the price of a new operator and the existing unit is already struggling with repeated failures, replacement makes more financial sense. Below that line, repair wins.
A few signs that point toward replacement rather than repair:
- The operator is failing in more than one way at once (motor plus board plus sensors).
- The gate frame itself is bent or rusted through in load-bearing spots.
- Parts for the existing system are no longer made for it.
- You need commercial access-control features your current operator was never built to run.
If you’re weighing it, we’ll give you both numbers: the repair cost and the replacement cost, side by side. That’s what a specialist does. Call (888) 399-8022 and we’ll talk through which makes sense for your gate.
Why a Gate Specialist Costs Less Than a Generalist
A general handyman may quote lower, but a gate is a system, not a fence panel. The motor, the control board, the sensors, the hinges, and the structure all interact. When the person diagnosing it doesn’t know the system, you pay for trial and error. A dedicated gate technician finds the fault and fixes it once.
That’s the difference. We’re not a garage-door company that handles gates on the side. Every tool and every part we bring is focused on gates, and that focus is why we can say no guesswork up front. Our technicians have up to 12 years of experience, working on residential swing gates, slide gates, and commercial access-control openers. When you need gate repair, the right question to ask isn’t “how cheap” but “who knows my system.”
FAQs – Gate Repair Cost
What’s the average cost of gate repair in Pompano Beach?
The average gate repair in Pompano Beach runs around $185 to $650 for residential systems, with most hardware and sensor fixes landing in the $150 to $375 range. Commercial access-control work runs higher. Call (888) 399-8022 for an exact quote; estimates are free.
How much does it cost to replace a gate motor or operator?
Operator replacement typically costs $650 to $2,400, depending on the brand, whether it’s residential or commercial, and how much wiring has to be re-run. We work with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so the part matches your gate. Call (888) 399-8022 to price your specific system.
Can you fix my gate the same day?
Same-day repair is often possible for common failures like sensor, remote, and hinge issues, and most jobs are diagnosed and quoted on the first visit. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday. Call (888) 399-8022 to check availability for today.
Is it cheaper to repair or replace a gate?
Repair is cheaper in most cases, often 60% to 80% less than a full replacement when the frame and operator are still sound. Replacement usually makes sense only when multiple components have failed together or parts are no longer available. Call (888) 399-8022 and we’ll give you both numbers.
Do you charge for the estimate?
No, the estimate is free. The price of the repair is set per job by the written estimate, so you approve the number before any work starts. There’s no separate line for the visit. Call (888) 399-8022 to get yours scheduled.
What does a new gate installation cost in Pompano Beach?
New gate installation typically runs $2,800 to $7,500, including the gate, posts, operator, and access-control setup. The range widens with commercial systems and custom gate sizes. Call (888) 399-8022 for an on-site estimate.
Get a Free Gate Repair Estimate in Pompano Beach
If your gate isn’t working the way it should, the fastest way to a real number is a phone call. We’re a gate-only specialist, we work on the brand you already have, and we’d rather diagnose the actual problem than sell you a part you don’t need. Whether it’s the motor, the board, or the hardware, we’ll get it back to working order and tell you the cost before we touch a thing.
Call (888) 399-8022. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. The estimate is free, the price is set per job by the written estimate, and our technicians have up to 12 years of experience working on gates across Pompano Beach. We can also work with your insurer if storm damage is part of the picture.
Pricing reflects the Pompano Beach market as of 2026. Gate Repair Pompano Beach offers free estimates – call (888) 399-8022.
Written by the team at Gate Repair Pompano Beach.
What Our Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Diego Reyes"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Jamal Carter"Repair is holding. He was quite a bit later than the window I was given, and nobody called me about it, I had to call them. The work itself was done well once he got here."
- Hector Rodriguez