Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Delray Beach, FL
We provide independent Ghost Controls gate repair across Delray Beach, from the Intracoastal estates near Marine Way to the 55+ communities out around Kings Point. The thing that shapes our Ghost Controls work here is salt: a control board that lasts years inland corrodes at its terminals only a few blocks from the water. Our technicians have up to 12 years of experience with Ghost Controls and eight other gate brands, and we diagnose the actual fault before we quote a repair. Call (888) 399-8022 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Delray Beach Residents Choose Us for Ghost Controls Service
We’re a dedicated gate shop, not a garage-door company that takes gates on the side. Every technician and every part we bring is focused on gate operators and hardware, so a Ghost Controls swing or slide system lands with someone who works on it regularly alongside LiftMaster, Mighty Mule and DoorKing units. That matters in Delray Beach, where one property may run a decorative estate gate and the neighbor runs a standardized community-entry operator.
We’re independent. Gate Repair Pompano Beach is not affiliated with, authorized by, or a dealer for Ghost Controls. What we offer instead is fluency: we know where the DIY-friendly design of these operators creates recurring service points, and we use quality parts that fit the existing housing so your keypad and solar ecosystem keep working. Whether the trouble is the motor, the control board, or the hinge and post hardware, we handle it under one roof. No guesswork, no default replacement quote.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Solve in Delray Beach
These are the Ghost Controls faults we see most often in Delray Beach, and why the local setting makes each one worse.
- Control-board and battery-harness corrosion. Ghost Controls’ exposed board tray and spade terminals pit and green up fast in salt-laden Intracoastal air, especially on gates a block from the water in 33483. The first symptom is usually intermittent “no response,” then a gate that ignores the remote or keypad entirely.
- Solar and battery voltage sag. Out in the western 55+ communities, operators often run battery-only on aging solar panels. Low voltage throws false obstruction faults, so the gate reverses mid-travel or stops partway.
- Limit-switch and magnet drift after wind events. Hurricane-season gusts and post-storm strike adjustments knock swing arms out of their travel range. Left alone, the arm over-travels and bends, or the actuator mount works loose from its post.
- Arm-mount and hinge binding. When the original zinc fasteners on a coastal gate get reused, galvanic corrosion seizes the pivot and overloads the operator. The motor isn’t failing; it’s fighting a hinge that won’t move.
- Weather-beaten remote and keypad pairing. Salt haze and moisture work into keypad housings and remote contacts, so a system that powers up fine still won’t accept commands from either device.
Ghost Controls Service in Delray Beach: What Local Conditions Mean for Your Equipment
Delray Beach has two gate worlds that rarely overlap, and Ghost Controls systems age differently in each. East of the Intracoastal, gates a block from the saltwater in 33483 pit and corrode galvanically at hinges, fasteners and operator arms within a few years. The same Ghost Controls swing operator eight miles inland around Kings Point can last far longer on the same duty cycle, because it isn’t breathing salt every day. That’s why the identical model can need heavier marine-grade stainless hardware on the east side and standard hardware out west. We size the repair to the gate in front of us, not to the label on the box.
Ghost Controls Models & Products We Service in Delray Beach
We service the full spread of Ghost Controls residential operators found around Delray Beach: the heavy-duty single swing (AXS and AXTB), the dual swing (AXD), and the slide operator (AXSL). That includes motor repair, battery backup work, and hinge and post repair on the gates these units drive.
Where the model is still supported, we use Ghost Controls OEM boards, arms, limit switches and harnesses. They fit the existing housing and keep your keypad and solar setup intact. On coastal gates, we swap zinc fasteners for marine-grade stainless regardless of brand. We don’t stock or order parts from a warehouse claim; we source quality parts that fit your specific unit and confirm the match before we install.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Delray Beach
Every Ghost Controls job is priced per job from a free written estimate, and the written estimate sets the final price. There’s no separate service-call or diagnostic fee. What drives the number is what’s actually failed: a board and harness swap costs less than an arm replacement with post work, and coastal hardware upgrades add to either. Repair is usually the right call when the operator is otherwise sound; replacement makes sense only when the gearbox, housing and mounts are corroded past economical repair. We quote before any work starts, so you know the figure first. Call (888) 399-8022 for your free estimate.
Serving Delray Beach, FL – Our Local Coverage Area
We serve Delray Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Delray Beach
It’s almost always low voltage or a drifted limit, not a failing motor. In Delray Beach, a corroded control board or a battery running low on solar-only power sends false obstruction signals, so the gate reverses mid-travel. We check voltage and limits first, then clean or replace the board and harness with OEM parts and re-set the travel path. Call (888) 399-8022 for an exact quote – estimates are free.
Yes. Salt-laden air near the Intracoastal pits hinges, fasteners and operator arms within a few years, so those gates need marine-grade stainless hardware. The same model eight miles inland around Kings Point can run standard hardware far longer.
Most wind-event damage is repairable: a bent swing arm, a loosened actuator mount, or a limit switch knocked out of alignment. We replace the arm or mount and re-set the limits. Replacement comes up only when the housing and gearbox are corroded beyond economical repair. Call (888) 399-8022 for a free estimate.
A failed pairing or a corroded receiver connection, usually from moisture in the keypad housing or salt haze on the board terminals. We diagnose the board and harness first, since a weak connection there can drop both devices at once.
It can work, but aging panels and battery sag are the usual culprits behind false faults out west. We test the panel output and battery condition, then restore reliable voltage with a battery backup fix or a proper replacement. Call (888) 399-8022 for an exact quote – estimates are free.
Service Areas Near Delray Beach
We cover Ghost Controls gate repair throughout Delray Beach and the surrounding area, including Pompano Beach to the south, Boynton Beach just north, and Boca Raton beyond that. If you’re nearby and unsure whether we reach you, call and we’ll confirm.
Book Your Ghost Controls Service in Delray Beach Today
Whether your Ghost Controls gate is reversing, dead at the keypad, or overdue for hinge and post repair, we’ll diagnose it accurately and quote before any work begins. Same-day service is available for many repairs. Call (888) 399-8022. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Gate Repair Pompano Beach.